Specification Chapter 7.Specification Printing method Thermal line printing Dot density 203 dpi 203 dpi ( 8 8 dots/mm) Printing width 72 mm, 576 dot positions Characters per line 48 (default) or 72 Character size 1.25 3.00 mm Number of characters Alphanumeric characters: 95 Print speed Approx. : Chapter 7.interface Chapter 7.Interface RS-232C Cable Connection PRINTER HOST SIDE(25P) SIDE(9P) (F.G) (F.G) (TXD) (TXD) (RXD) (RXD) (RTS) (CTS) (DSR) (DSR) (DTR) (DTR) (S.G) (S.G) Interface Connector Serial Interface (RS-232) Pin No Signal name Direction Function Frame Ground Output Transmit Data Input Receive Data Output Ready To Send.Turn on the power while holding down the FEED button. Make sure paper roll has been installed properly. If the printer does not function properly, contact your dealer. The self test The self-test checks whether the printer has any problems. Remove the used paper roll core if there is one. Open the paper roll cover by pressing the cover-open button. Make sure that the printer is not receiving data otherwise, data may be lost. Installing or Replacing the Paper Roll 1. Connecting the AC adapter to the printer You can connect up the three cables to the printer. Connecting the AC Cable NOTE:To remove the DC cable connector, make sure that the power supply s power cord is unplugged then grasp the connector at the arrow and pull it straight out.
Installing the printer Avoid locations in direct sunlight or subject to excessive heat.
RP-3180 Roll paper Operator s M anual Power cord 1-2. If any items are damaged or missing, please contact your dealer for assistance. Unpacking Your printer box should include these items. High speed printing: 180mm per second max. The main features of the printer are as follows: 1.
NOTICE You must use the supplied adapter only.RP-3180 MINI Thermal Printer USER'S MANUAL TVS Electronics Limited MANUAL REVISION V8.1.Summary of Contents for TVS electronics MINI THERMAL RP-3180 9 wire, 136 column, 300 cps, super fast workgroup printer (2 pages)
0 kommentar(er)
